The first version of the Stingher 606 XS was launched in 2001, and since then, thanks to our continuous and inexhaustible attention to its improvement, the Stingher 606XS is still recognized as one of the best 6.0m Ribs of its category.



The classic design fits perfectly with the sober and balanced line of the Rib, which in a little over 6 meters offerts equipment, comfort and roominess not far from its superior models.
The stern includes a double bathing platform with a retractable ladder, an extendable shower head and large walkable areas aboce the tubes. To bow and to stern there are two large sunbathing areas, both extensible when necessary. The stern sunbathing area can be converted into a 5-seater dinette with a central table, and it is possible to eat in full shade thanks to the bimini that folds on the GRP rollbar. The driving console offerts good wind protection and has a large dashboard on which you can comfortably install all the necessary equipment. The large storage capacity is ensured by two large lockers located to bow and to stern, and by multiple storage compartments distributed on the Rib.
The Stingher 606 XS is an evergreen of the Stingher range, ideal for the needs of a couple or a small family.



Overall length 6.16 m (20ft 3in)
Beam 2.67 m (8ft 9in)
Draft to props
Tube ø 45÷59 cm (1ft 6in ÷ 1ft)
Air chambers 5
Weight (excl. Engines) 600 kg (1322lbs)
Max Passengers 10
Fuel tank capacity 200 lt (52 gal)
Water tank capacity 50 lt (13 gal)
Construction GRP hull and deck
Hypalon/Neoprene 1670dtex fabric tubes
CE certification category C - Offshore
Outboard engines - suggested 1 x 125 hp
Outboard engines - max 1 x 175 hp
Fuel consumption, cruise 1.4 l / nm (1 x 350 hp @ 28 knots)
Hull type 22 degree deep V
Design Andrea Risolo
Shipyard Italboats




The steering console has a wide dashboard for the installation of gauges, wide screen GPS, VHF, stereo, switches and many other controllers.


The stern sofa thanks to a high and fully padded backrest offers a high level of comfort and safety to passengers.


The aft sofa can easily be converted into a large and comfortable sundeck.



Hull and deck
  • Deep V hull
  • Hand layed hull, deck and GRP components
  • Antiskid diamond finishing on walkable areas
  • Hull ventilation system
  • Self-draining deck
  • Stern and bow U bolts for mooring
  • Bow nose with rope roller and cleat
  • Stern cleats, 2x
  • CNC cutted and hand-glued hypalon / neoprene fabric tubes
  • Double rubbing strake covering the whole side of the tubes
  • Hypalon and rubber safety handles
  • Inflation valves
  • Overpressure valves (only with dark hypalon fabrics)
Steering console and helm seat
  • Steering console with overshadowed windscreen
  • Front and side 316 s.steel handrails
  • Steering wheel, 316 s.steel
  • Hydraulic steering system
  • Switch panel, Carling Switches
  • Helmsman double reclining seat, for standing or sitting drive
Deck layout
  • Stern seat with removable cushion and soft back, storage locker underneath
  • Bow sundeck with removable cushions, storage locker underneath
  • Removable bow sundeck extension with cushion
  • Removable stern sundeck extension with cushion
  • External dining area
  • GRP table, adjustable in height and width
  • Flush pull latches and gas struts on all the hatches
  • Handrail behind stern seat, 316 s. steel
  • Swim ladder, telescopic
  • Ladder side handle, s.steel
Systems and electrical
  • Automatic bilge pump, electric
  • electric inflation pump
  • Battery container
  • Battery isolation switch
  • Navigation lights
  • Fuel system with external deck filler cap
  • Shower extendable handset
Other hardware
  • Paddles and air pump
  • Owner’s manual



  • Folding rings and straps kit for boat hauling
  • GRP rollbar with navigation lights
  • bimini top for rollbar in fiberglass, 316 stainless steel
  • stainless steel hard top
  • stern platforms
  • 20lt drawer refrigerator
  • Console cover
  • Seat cover
  • Boat cover
  • Courtesy LED lights on decking and cockpit
  • Extra fender insert between tubular
  • Extra for tubular in two-color version
  • Extra for tubular with fabric in carbon finish (stern / total)
  • Extra for non-standard hull color (different from white)
  • Extra for non-standard blanket coloring (different from white)
  • Carbon look tubular fabric
  • Synthetic teak upholstery - partial package (console platform, stern platforms and bow roller)
  • Synthetic teak upholstery - full package (supra-tubular walkways, engine cockpit,console platform,internal trampling,door anchor, stern platforms and bow roller)
  • Synthetic teak upholstery - extra counter package (Additional upholstery on all seating and sunbathing areas)
  • Synthetic teak upholstery - extra hatches package (Additional upholstery on stern and bow)



Stingher Custom Design was created with the sole intention of offering our customers the latest in technology and the highest quality materials, to custom build you an individual Stingher.

We are able to offer the widest choice of colors and materials for the construction of the hull, the tubes and the upholstery of your Stingher, sport or premium helm seat, deck - locker and underwater LED lighting, excellent audio systems and a wide range of custom option for your deck hardware including special hinges, ski poles, solar panels and custom-made T-top.

All of this with the sole intention to make your Stingher exclusive.


A boat configurator will be available soon. Stay in the loop!

Contact Us

Italboats S.r.l.
Zona Industriale, snc
73054 Presicce-Acquarica (LE) - Italy

Phone +39 0833 722 553
Whatsapp +39 351 534 5854

Follow Us

P.Iva/VAT IT 11642820150 | Iscritta al REA di Lecce n. LE 293728 | Cap. Sociale € 100.000,00 i.v. | Copyright © 2022

Open Menu
Inizio Codice ShinyStat Fine Codice ShinyStat