previous arrow
next arrow



Stingher 28 GT is the maximum expression of style, comfort and performance according to Italboats.
It is the latest addition to our GT series and also represents a turning point for new construction technologies and innovative solutions.



The hull is a new concept: evolution of the renowned 27 GT, it has a much deeper V with variable incidence, guaranteeing an exceptionally dry and soft ride even on rough seas, and at the same time impeccable handling.
Thanks to the internal width of 190cm, it was possible to create a comfortable U shape dining area and two large sunbathing areas.
The main console not only has lots of room for your gauges and instruments like 12" GPS, VHF, stereo and other controllers, it also has a large door in the front, with built in seat, that opens up to reveal a toilet area with electric flush sea toilet and sink.
The position of the helm unit is extremely confortable, and via the double reclining seat allows you to drive standing or sitting, always maintaining an excellent view at sea. In the helm unit is also included the 50lt electric fridge, stainless steel sink and electric or gas cooker.
At the stern there is a dining area with adjustable central table, which can comfortably accommodate 5 people, convertible into a second large sundeck in addition to the bow one. The stern backrest is completely foldable, further expanding the sundeck and creating easy access on deck.



Length overall (LOA) 8.54 m (28ft 0.2in)
Hull length (Lh) 7.99 m (26ft 2in)
Beam overall (BOA) 3.20 m (10ft 6in)
Draft to props
Tube ø 57÷66 cm (1ft ÷ 2ft 2in)
Air chambers 6
Weight (excl. Engines) 1500 kg (3306lbs)
Max Passengers 16
Fuel tank capacity 350 lt (92 gal)
Water tank capacity 80 lt (21 gal)
Construction GRP hull and deck
Hypalon/Neoprene 1670dtex fabric tubes
CE certification category, B+C module B - Offshore
Outboard engines - suggested 1 x 300 - 2 x 200 hp
Outboard engines - max 1 x 450 - 2 x 225 hp
Fuel consumption, cruise 1.3 l / nm (1 x 300 hp @ 28 knots)
Hull type 24 degree deep V
Design Giuseppe Risolo
Shipyard Italboats




The steering console has a wide dashboard for the installation of gauges, wide screen GPS, VHF, stereo, switches and many other controllers.


The side view of the steering console shows the modern and sophisticated design that perfectly fits functionality and offers room for for an agile passage towards the bow.


The console has a large door in the front, with built in seat, that opens up to reveal a toilet area with electric flush sea toilet and sink.


The double reclining seat allows you to drive standing or sitting, always maintaining an excellent view at sea.


The seats for driver and copilot are indipendent, and are designed to ensure a good lateral support while sailing in rough seas condition.


The bow sundeck is really wide and has a removable central extension to allow an easy passage towards the bow.



Hull and deck
  • Deep V hull
  • Hand layed hull, deck and GRP components
  • Antiskid diamond finishing on walkable areas
  • Hull ventilation system
  • Self-draining deck
  • Stern and bow U bolts for mooring
  • Bow nose with rope roller and cleat
  • Stern cleats, 2x
  • CNC cutted and hand-glued hypalon / neoprene fabric tubes
  • Double rubbing strake covering the whole side of the tubes
  • Hypalon and rubber safety handles
  • Inflation valves
  • Overpressure valves (only with dark hypalon fabrics)
Steering console and helm seat
  • Steering console with overshadowed windscreen
  • Steering wheel, 316 s.steel
  • Hydraulic steering system
  • Dashboard, carbon fibre look
  • Switch panel, Carling Switches
  • Toilet compartment / changing room, inside the console
  • 2 lateral portholes
  • Helmsman double reclining seat, for standing or sitting drive
Deck layout
  • Stern seat with removable cushion and soft back, storage locker underneath
  • Bow sundeck with removable cushions, storage locker underneath
  • Removable stern sundeck extension with cushion
  • External dining area
  • GRP table, adjustable in height and width
  • Flush pull latches and gas struts on all the hatches
  • Handrail behind stern seat, 316 s. steel
  • Swim ladder, telescopic
  • Bathing platforms
  • Ladder side handle, s.steel
Systems and electrical
  • Automatic bilge pump, electric
  • electric inflation pump
  • Battery container
  • Battery isolation switch
  • Navigation lights
  • Fuel system with external deck filler cap
  • Shower extendable handset
  • Sink for fresh water, 316 s.steel
  • Marine toilet with electric flush and holding tank
  • Electric windlass including main and remote console control, anchor roller, s.steel anchor and chain
Other hardware
  • Paddles and air pump
  • Owner’s manual



  • Folding rings and straps kit for boat hauling
  • GRP rollbar with navigation lights
  • bimini top for rollbar in fiberglass, 316 stainless steel
  • stainless steel hard top
  • Stern hood in stainless steel
  • 50 or 60 liter stainless steel refrigerator
  • Gas cooker, complete with Campingaz cylinder system
  • Induction cooker (requires 220V system)
  • Console cover
  • Seat cover
  • Boat cover
  • Courtesy LED lights on decking and cockpit
  • Bow thruster
  • Extra fender insert between tubular
  • Extra for tubular in two-color version
  • Extra for tubular with fabric in carbon finish (stern / total)
  • Extra for non-standard hull color (different from white)
  • Extra for non-standard blanket coloring (different from white)
  • 220V electrical system complete with 12V battery charger, dock cable, panel and 2 sockets.
  • Carbon look tubular fabric
  • Synthetic teak upholstery - partial package (console platform, stern platforms and bow roller)
  • Synthetic teak upholstery - full package (supra-tubular walkways, engine cockpit,console platform,internal trampling,door anchor, stern platforms and bow roller)
  • Synthetic teak upholstery - extra counter package (Additional upholstery on all seating and sunbathing areas)
  • Synthetic teak upholstery - extra toiletries package (Additional upholstery on stern, bow and toilet compartment hatches)




Stingher Custom Design was created with the sole intention of offering our customers the latest in technology and the highest quality materials, to custom build you an individual Stingher.

We are able to offer the widest choice of colors and materials for the construction of the hull, the tubes and the upholstery of your Stingher, sport or premium helm seat, deck - locker and underwater LED lighting, excellent audio systems and a wide range of custom option for your deck hardware including special hinges, ski poles, solar panels and custom-made T-top.

All of this with the sole intention to make your Stingher exclusive.


Try now our CONFIGURATOR and create your Stingher!


Contact Us

Italboats S.r.l.
Zona Industriale, snc
73054 Presicce-Acquarica (LE) - Italy

Phone +39 0833 722 553
Whatsapp +39 351 534 5854

Follow Us

P.Iva/VAT IT 11642820150 | Iscritta al REA di Lecce n. LE 293728 | Cap. Sociale € 100.000,00 i.v. | Copyright © 2024

Open Menu
Inizio Codice ShinyStat Fine Codice ShinyStat