The Stingher 24 GT is the 2023 novely of the GT range, and was born from the perfect meeting point between the versatility of the 22 GT and the performance qualities of the 28 GT.



It has been designed and built using innovate 3D modeling and CAM processing techniques combined with our thirty years of craftsmanship experience.
The hull is the direct evolution of that of the 28GT: deep V of the Greek school with an elongated stem in Anglo-Saxon style, to guarantee speed, comfort and maneuverability at the same time.
The driving console is a perfect fusion of aesthetics and functionality. As on all GT models, it is equipped with a truly enveloping windshield, a large dashboard for on-board instruments and a toilet / changing room which can be accessed from the front door.
The reclining seat is incredibly ergonomic for both standing and seated driving. it is possible to install a 50 lt stainless steel refrigerator, stainless steel sink and a gas or electric stove.
At the bow we find a large sundeck that hides a locker with large stowage capacity.
Access from the stern is facilitated by the folding backrest which also acts as an extension for the sundeck. Aft there is also a practical dining area that can accommodate 5 people.




Length overall (LOA) 7.48 m (24ft 5in)
Beam overall (Bmax) 3.00 m (9ft 8in)
Hull length (Lh) 6.99 m (22ft 11in)
Hull beam (Bh) 3.00 m (9ft 8in)
Draft to props
Tube ø 57÷66 cm (1ft 8in ÷ 2ft 1in)
Air chambers 6
Weight (excl. Engines) 1100 kg (2425lbs)
Max Passengers 14
Fuel tank capacity 260 lt (68 gal)
Water tank capacity 80 lt (21 gal)
Construction GRP hull and deck
Hypalon/Neoprene 1670dtex fabric tubes
CE certification category B - Offshore
Outboard engines - suggested 1 x 250 hp
Outboard engines - max 1 x 300 hp
Fuel consumption, cruise 0,8 l / nm (1 x 200 hp @ 25 knots)
Hull type 22 degree deep V
Design Andrea Risolo
Shipyard Italboats



Hull and deck
  • Deep V hull
  • Hand layed hull, deck and GRP components
  • Antiskid diamond finishing on walkable areas
  • Hull ventilation system
  • Self-draining deck
  • Stern and bow U bolts for mooring
  • Bow nose with rope roller and cleat
  • Stern cleats, 2x
  • CNC cutted and hand-glued hypalon / neoprene fabric tubes
  • Double rubbing strake covering the whole side of the tubes
  • Hypalon and rubber safety handles
  • Inflation valves
  • Overpressure valves (only with dark hypalon fabrics)
Steering console and helm seat
  • Steering console with overshadowed windscreen
  • Steering wheel, 316 s.steel
  • Hydraulic steering system
  • Dashboard, carbon fibre look
  • Switch panel, Carling Switches
  • Toilet compartment / changing room, inside the console
  • 2 lateral portholes
  • Helmsman double reclining seat, for standing or sitting drive
Deck layout
  • Stern seat with removable cushion and soft back, storage locker underneath
  • Bow sundeck with removable cushions, storage locker underneath
  • Removable stern sundeck extension with cushion
  • External dining area
  • GRP table, adjustable in height and width
  • Flush pull latches and gas struts on all the hatches
  • Handrail behind stern seat, 316 s. steel
  • Bathing platforms
  • Swim ladder, telescopic
  • Ladder side handle, s.steel
Systems and electrical
  • Automatic bilge pump, electric
  • electric inflation pump
  • Battery container
  • Battery isolation switch
  • Sink for fresh water, 316 s.steel
  • Navigation lights
  • Fuel system with external deck filler cap
  • Marine toilet with electric flush and holding tank
  • Shower extendable handset
  • Electric windlass including main and remote console control, anchor roller, s.steel anchor and chain
Other hardware
  • Paddles and air pump
  • Owner’s manual



  • Folding rings and straps kit for boat hauling
  • GRP rollbar with navigation lights
  • bimini top for rollbar in fiberglass, 316 stainless steel
  • stainless steel hard top
  • stainless steel aft canopy
  • 50 or 60 liter stainless steel refrigerator
  • Gas cooker, complete with Campingaz cylinder system
  • Induction cooker (requires 220V system)
  • bow propeller
  • Console cover
  • Seat cover
  • Boat cover
  • Courtesy LED lights on decking and cockpit
  • Extra fender insert between tubular
  • Extra for tubular in two-color version
  • Extra for tubular with fabric in carbon finish (stern / total)
  • Extra for non-standard hull color (different from white)
  • Extra for non-standard blanket coloring (different from white)
  • 220V electrical system complete with 12V battery charger, dock cable, panel and 2 sockets.
  • Carbon look tubular fabric
  • Synthetic teak upholstery - partial package (console platform, stern platforms and bow roller)
  • Synthetic teak upholstery - full package (supra-tubular walkways, engine cockpit,console platform,internal trampling,door anchor, stern platforms and bow roller)
  • Synthetic teak upholstery - extra counter package (Additional upholstery on all seating and sunbathing areas)
  • Synthetic teak upholstery - extra toiletries package (Additional upholstery on stern, bow and toilet compartment hatches)




Stingher Custom Design was created with the sole intention of offering our customers the latest in technology and the highest quality materials, to custom build you an individual Stingher.

We are able to offer the widest choice of colors and materials for the construction of the hull, the tubes and the upholstery of your Stingher, sport or premium helm seat, deck - locker and underwater LED lighting, excellent audio systems and a wide range of custom option for your deck hardware including special hinges, ski poles, solar panels and custom-made T-top.

All of this with the sole intention to make your Stingher exclusive.


Try now our CONFIGURATOR and create your Stingher!


Contact Us

Italboats S.r.l.
Zona Industriale, snc
73054 Presicce-Acquarica (LE) - Italy

Phone +39 0833 722 553
Whatsapp +39 351 534 5854

Follow Us

P.Iva/VAT IT 11642820150 | Iscritta al REA di Lecce n. LE 293728 | Cap. Sociale € 100.000,00 i.v. | Copyright © 2024

Open Menu
Inizio Codice ShinyStat Fine Codice ShinyStat