The Stingher 22 GT is not to be overlooked with capabilities and features well above any other competitors model in its class.



The Stingher 22 GT was launched in 2017 and adopts the renowned 22 Diabo hull, well known to be the evolution of the winning Stingher 686XS. Also the deck comes from the 22 Diablo, but it has been redesigned bringing it up to date in styling with the rest of the Stingher GT series.
The spaces have been optimized to offer the same accessories provided with the bigger GT models, still offering freedom of movement and high comfort. The helm seat unit is very comfortable, and it is fitted with folding table, sink, cooker and fridge if required. The newly designed console gives good wind protection and has front opening door woth integral seat. On opening the front door, you step down into the console, which can be fitted with an electric flush sea toilet.
It is available in single outboard version up to a maximum if 200hp, which pushes the rib up to 46kn in favorable sea condition. As with all Stingher models the high performance hull is a true deep V.This provides an exceptionally dry and smooth ride, with impeccable handling, with no slamming.
The Stingher 22 GT stands out for being a practical, sporty and comfortable RIB at the same time, so appreciated by the whole family.



Overall length 6.80 m (22ft 3in)
Beam 2.84 m (9ft)
Draft to props
Tube ø 49÷59 cm (1ft 6in ÷ 1ft 9in)
Air chambers 6
Weight (excl. Engines) 800 kg (1763lbs)
Max Passengers 12
Fuel tank capacity 200 lt (53 gal)
Water tank capacity 50 lt (13 gal)
Construction GRP hull and deck
Hypalon/Neoprene 1670dtex fabric tubes
CE certification category C - Coastal
Max speed range 38-46 kn
Outboard engines - suggested 1 x 150 hp
Outboard engines - max 1 x 200 hp
Fuel consumption, cruise 0,8 l / nm (1 x 200 hp @ 25 knots)
Hull type 22 degree deep V
Design Andrea Risolo
Shipyard Italboats




The steering console has a wide dashboard for the installation of gauges, wide screen GPS, VHF, stereo, switches and many other controllers.


The side view of the steering console shows the modern and sophisticated design that perfectly fits functionality and offers room for for an agile passage towards the bow.


The console has a large door in the front, with built in seat, that opens up to reveal a toilet / changin room area wich can be equipped with electric flush sea toilet.


The double reclining seat allows you to drive standing or sitting, always maintaining an excellent view at sea.


The seats for driver and copilot are indipendent, and are designed to ensure a good lateral support while sailing in rough seas condition.


The bow sundeck can accomodate 2 persons and has a removable central extension to allow an easy passage towards the bow.



Hull and deck
  • Deep V hull
  • Hand layed hull, deck and GRP components
  • Antiskid diamond finishing on walkable areas
  • Hull ventilation system
  • Self-draining deck
  • Stern and bow U bolts for mooring
  • Bow nose with rope roller and cleat
  • Stern cleats, 2x
  • CNC cutted and hand-glued hypalon / neoprene fabric tubes
  • Double rubbing strake covering the whole side of the tubes
  • Hypalon and rubber safety handles
  • Inflation valves
  • Overpressure valves (only with dark hypalon fabrics)
Steering console and helm seat
  • Steering console with overshadowed windscreen
  • Front and side 316 s.steel handrails
  • Steering wheel, 316 s.steel
  • Hydraulic steering system
  • Dashboard, carbon fibre look
  • Switch panel, Carling Switches
  • Toilet compartment / changing room, inside the console
  • 2 lateral portholes
  • Helmsman double reclining seat, for standing or sitting drive
Deck layout
  • Stern seat with removable cushion and soft back, storage locker underneath
  • Bow sundeck with removable cushions, storage locker underneath
  • Removable bow sundeck extension with cushion
  • External dining area
  • GRP table, adjustable in height and width
  • Flush pull latches and gas struts on all the hatches
  • Handrail behind stern seat, 316 s. steel
  • Swim ladder, telescopic
  • Ladder side handle, s.steel
Systems and electrical
  • Automatic bilge pump, electric
  • electric inflation pump
  • Battery container
  • Battery isolation switch
  • Navigation lights
  • Fuel system with external deck filler cap
  • Shower extendable handset
  • Electric windlass including main and remote console control, anchor roller, s.steel anchor and chain
Other hardware
  • Paddles and air pump
  • Owner’s manual



  • Folding rings and straps kit for boat hauling
  • GRP rollbar with navigation lights
  • bimini top for rollbar in fiberglass, 316 stainless steel
  • stainless steel hard top
  • Sink for fresh water, 316 s.steel
  • 20lt drawer refrigerator
  • 50 or 60 liter stainless steel refrigerator
  • Gas cooker, complete with Campingaz cylinder system
  • Induction cooker (requires 220V system)
  • Marine toilet with electric flush and holding tank
  • Bathing platforms
  • Console cover
  • Seat cover
  • Boat cover
  • Courtesy LED lights on decking and cockpit
  • Extra fender insert between tubular
  • Extra for tubular in two-color version
  • Extra for tubular with fabric in carbon finish (stern / total)
  • Extra for non-standard hull color (different from white)
  • Extra for non-standard blanket coloring (different from white)
  • 220V electrical system complete with 12V battery charger, dock cable, panel and 2 sockets.
  • Carbon look tubular fabric
  • Synthetic teak upholstery - partial package (console platform, stern platforms and bow roller)
  • Synthetic teak upholstery - full package (supra-tubular walkways, engine cockpit,console platform,internal trampling,door anchor, stern platforms and bow roller)
  • Synthetic teak upholstery - extra counter package (Additional upholstery on all seating and sunbathing areas)
  • Synthetic teak upholstery - extra toiletries package (Additional upholstery on stern, bow and toilet compartment hatches)




Stingher Custom Design was created with the sole intention of offering our customers the latest in technology and the highest quality materials, to custom build you an individual Stingher.

We are able to offer the widest choice of colors and materials for the construction of the hull, the tubes and the upholstery of your Stingher, sport or premium helm seat, deck - locker and underwater LED lighting, excellent audio systems and a wide range of custom option for your deck hardware including special hinges, ski poles, solar panels and custom-made T-top.

All of this with the sole intention to make your Stingher exclusive.


Try now our CONFIGURATOR and create your Stingher!


Contact Us

Italboats S.r.l.
Zona Industriale, snc
73054 Presicce-Acquarica (LE) - Italy

Phone +39 0833 722 553
Whatsapp +39 351 534 5854

Follow Us

P.Iva/VAT IT 11642820150 | Iscritta al REA di Lecce n. LE 293728 | Cap. Sociale € 100.000,00 i.v. | Copyright © 2024

Open Menu
Inizio Codice ShinyStat Fine Codice ShinyStat