previous arrow
next arrow



The Stingher 30 Zephyr it's a perfect rib to spend the weekend away, a true leader in the cabin Rib market.




The cabin has a seating area which converts into 2-3 berths. There is a full height shower and sea toilet fitted in the corner unit, along with lot of storage space underneath the beds, LED lighting, side portholes and just over the beds, complete furnishing and the possibility of installing smartTV, audio systems and air conditioning. The door into the cabin from the deck is tinted and fully lockable.
The sundeck areas are wide and comfortable, the full set of cushions for the bow and the stern sundeck comes as standard and upholstery is customisable as per all the Stingher models. The stern sundeck is convertible into a generous dining area with U shaped seat for 6 people and a detachable table. It is also fitted with a Bimini that folds on the GRP rollbar, which enables you to eat in full shade on hot days, and also gives sun protection to the helmsman and rear passengers whilst cruising at low speed. Fitted in the helm unit is a 50lt electric fridge, sink and gas or electric cooker.
The hull performance is exemplary, with twin 200hp it enables the Rib to cruise along very comfortably at 30-35kn with a top speed of 49kn, depending on sea conditions.
With the Stingher 30 Zephyr spending a weekend away in Corse, Sardinia or Greece becomes a reality.



Overall length 8.73 m (28ft 8in)
Beam 3.05 m (10ft)
Draft to props
Tube ø 42÷66 cm (1ft 5in ÷ 2ft 2in)
Air chambers 6
Weight (excl. Engines) 1700 kg (3747 lbs)
Max Passengers 14
Fuel tank capacity 350 lt (92 gal)
Water tank capacity 80 lt (21 gal)
Construction GRP hull and deck
Hypalon/Neoprene 1670dtex fabric tubes
CE certification category B - Offshore
Max speed range 40-53 kn
Outboard engines - min 1 x 300 hp
Outboard engines - suggested 1 x 350 - 2 x 200 hp
Outboard engines - max 1 x 450 - 2 x 250 hp
Fuel consumption, cruise
Hull type 22 degree deep V
Design Andrea Risolo
Shipyard Italboats




The steering console has a wide dashboard for the installation of gauges, wide screen GPS, VHF, stereo, switches and many other controllers.


The side view of the steering console shows the modern and sophisticated design that perfectly fits functionality and offers room for for an agile passage towards the bow.


The console has a large door in the front, with built in seat, that opens up to reveal a toilet area with electric flush sea toilet and sink.


The double reclining seat allows you to drive standing or sitting, always maintaining an excellent view at sea.


The seats for driver and copilot are indipendent, and are designed to ensure a good lateral support while sailing in rough seas condition.


The bow sundeck is really wide and has a removable central extension to allow an easy passage towards the bow.



Hull and deck
  • Deep V hull
  • Hand layed hull, deck and GRP components
  • Antiskid diamond finishing on walkable areas
  • Hull ventilation system
  • Self-draining deck
  • Stern and bow U bolts for mooring
  • Bow nose with rope roller and cleat
  • Stern cleats, 2x
  • CNC cutted and hand-glued hypalon / neoprene fabric tubes
  • Double rubbing strake covering the whole side of the tubes
  • Hypalon and rubber safety handles
  • Inflation valves
  • Overpressure valves (only with dark hypalon fabrics)
Steering console and helm seat
  • Steering console with overshadowed windscreen
  • Front and side 316 s.steel handrails
  • Steering wheel, 316 s.steel
  • Hydraulic steering system
  • Dashboard, carbon fibre look
  • Switch panel, Carling Switches
  • Toilet compartment / changing room, inside the console
  • 2 lateral portholes
  • Helmsman double reclining seat, for standing or sitting drive
Deck layout
  • Stern seat with removable cushion and soft back, storage locker underneath
  • Bow sundeck with removable cushions, storage locker underneath
  • Removable bow sundeck extension with cushion
  • External dining area
  • Plexiglass table, folding
  • GRP table, removable
  • Flush pull latches and gas struts on all the hatches
  • Handrail behind stern seat, 316 s. steel
  • Swim ladder, telescopic
  • Bathing platforms/li>
  • Ladder side handle, s.steel
Systems and electrical
  • Automatic bilge pump, electric
  • Battery container
  • Battery isolation switch
  • 12V and USB outlet
  • Navigation lights
  • Fuel system with external deck filler cap
  • Shower, extendable handset, stern area
  • Sink for fresh water, 316 s.steel
  • Electric drawer fridge 50lt
  • Marine toilet with electric flush and holding tank
  • Electric windlass including main and remote console control, anchor roller, s.steel anchor and chain
Other hardware
  • Paddles and air pump
  • Tube repair kit
  • Owner’s manual



  • Pad-Eye foldable rings and belts kit for boat lifting
  • GRP rollbar with navigation lights
  • Bimini top for GRP rollbar, 316 s.steel
  • 316 s.steel rollbar with navigation lights
  • Bimini top for s.steel rollbar, 316 s.steel
  • Bimini top with self-supporting structure, 316 s.steel
  • Gas cooker, complete with system for Campingaz gas bottle
  • Electric drawer fridge 20lt
  • Electric drawer fridge 50lt
  • Shower, sky and handset, inside the toilet
  • Water Ski Pole
  • Console cover
  • Helm unit cover
  • Boat cover
  • Carbon look tubes
  • Synthetic teak - base pack (over-tubes gangways, engine well, bathing platforms and bow nose)
  • Synthetic teak - full pack (internal deck, over-tubes gangways, engine well, bathing platforms and bow nose)
  • Synthetic teak - premium pack (internal deck, over-tubes gangways, engine well, bathing platforms and bow nose, bow and stern hatches, toilet compartment)




Stingher Custom Design was created with the sole intention of offering our customers the latest in technology and the highest quality materials, to custom build you an individual Stingher.

We are able to offer the widest choice of colors and materials for the construction of the hull, the tubes and the upholstery of your Stingher, sport or premium helm seat, deck - locker and underwater LED lighting, excellent audio systems and a wide range of custom option for your deck hardware including special hinges, ski poles, solar panels and custom-made T-top.

All of this with the sole intention to make your Stingher exclusive.


Try now our CONFIGURATOR and create your Stingher!


Contact Us

Italboats S.r.l.
Zona Industriale, snc
73054 Presicce-Acquarica (LE) - Italy

Phone +39 0833 722 553
Whatsapp +39 351 534 5854

Follow Us

P.Iva/VAT IT 11642820150 | Iscritta al REA di Lecce n. LE 293728 | Cap. Sociale € 100.000,00 i.v. | Copyright © 2022

Open Menu