STINGHER 30 GT A THOROUGHBRED FROM THE STINGHER STABLE
The Stingher 30 GT comes exceptionally well appointed and is available in either twin or single outboard versions.
Larger than our best selling 27 GT, the extra space allowed us to create a helm unit with double reclining seat to let you drive standing or sitting, and like on the bigger 32 GT the helm unit houses a 50lt electric fridge, s.steel sink and gas or electric cooker. The bow includes a U shaped area that can be used as 6 seat dining area with table in place, or sunbathing with the table stowed. There is a huge amount of locker space and under floor storage.
The size of the console has been increased, enabling us to fit larger GPS systems and a variety of gauges. Opening the front door, you step down into the full height console which can be fitted with electric flush sea toilet and sink.
As with all Stingher models, the high performance hull is a true deep V. This provides an exceptionally dry and smooth ride, with impeccable handling, with no slamming.
The Stingher 30 GT has the distinction of not only impressing the most demanding of drivers with its spectacular performance but also being a comfortable and social Rib which can be enjoyed by all the family.
GRP hull and deck Hypalon/Neoprene 1670dtex fabric tubes
CE certification category
B - Offshore
Max speed range
44-60 kn
Outboard engines - suggested
1 x 350 - 2 x 225 hp
Outboard engines - max
1 x 450 - 2 x 250 hp
Fuel consumption, cruise
1.4 l / nm (1 x 350 hp @ 28 knots)
Hull type
22 degree deep V
Design
Andrea Risolo
Shipyard
Italboats
FEATURES
STEERING CONSOLE - DASHBOARD
The steering console has a wide dashboard for the installation of gauges, wide screen GPS, VHF, stereo, switches and many other controllers.
STEERING CONSOLE - SIDE VIEW
The side view of the steering console shows the modern and sophisticated design that perfectly fits functionality and offers room for
for an agile passage towards the bow.
STEERING CONSOLE - FRONT VIEW
The console has a large door in the front, with built in seat, that opens up to reveal a toilet area with electric flush sea toilet and sink.
HELM SEATS
The double reclining seat allows you to drive standing or sitting, always maintaining an excellent view at sea.
HELM SEATS - DETAIL
The seats for driver and copilot are indipendent, and are designed to ensure a good lateral support while sailing in rough seas condition.
BOW SUNDECK
The bow sundeck is really wide and has a removable central extension to allow an easy passage towards the bow.
STERN SEAT
The stern seat, thanks to a high and fully padded backrest, offers a high level of comfort and safety to passengers.
DINING AREA
The dining area is located in the bow of the boat. It is equipped with a central GRP table, adjustable in height, and it can comfortably accommodate 5 people.
BATHING PLATFORMS
The deck around the engine's well is completely walkable. The bathing platforms allow an easy ascent on board through the telescopic swim ladder with lateral stainless steel handle.
FRIDGE, SINK AND COOKER CABINET
In the cabinet integrated in the driving seat can be equipped with a foldable plexiglass table and a 20lt electric fridge (table not available if the 50lt fridge is chosen), sink and electric or gas cooker.
TOILET / CHANGING ROOM
The toilet area includes the electric flush sea toilet. It can also be equipped with an optional sink and shower.
BIMINI TOP FOR GRP ROLLBAR
The bimini is practical and functional: it can be opened or folded on the VTR rollbar in a few seconds. The shadow zone extends from the stern to the pilot. It can be kept open during navigation at moderate speeds.
STANDARD EQUIPMENT
Hull and deck
Deep V hull
Hand layed hull, deck and GRP components
Antiskid diamond finishing on walkable areas
Hull ventilation system
Self-draining deck
Stern and bow U bolts for mooring
Bow nose with rope roller and cleat
Stern cleats, 2x
Tubes
CNC cutted and hand-glued hypalon / neoprene fabric tubes
Double rubbing strake covering the whole side of the tubes
Hypalon and rubber safety handles
Inflation valves
Overpressure valves (only with dark hypalon fabrics)
Steering console and helm seat
Steering console with overshadowed windscreen
Front and side 316 s.steel handrails
Steering wheel, 316 s.steel
Hydraulic steering system
Dashboard, carbon fibre look
Switch panel, Carling Switches
Toilet compartment / changing room, inside the console
2 lateral portholes
Helmsman double reclining seat, for standing or sitting drive
Deck layout
Stern seat with removable cushion and soft back, storage locker underneath
Bow sundeck with removable cushions, storage locker underneath
Removable bow sundeck extension with cushion
External dining area
Plexiglass table, folding
GRP table, removable
Flush pull latches and gas struts on all the hatches
Handrail behind stern seat, 316 s. steel
Swim ladder, telescopic
Bathing platforms/li>
Ladder side handle, s.steel
Systems and electrical
Automatic bilge pump, electric
Battery container
Battery isolation switch
12V and USB outlet
Navigation lights
Fuel system with external deck filler cap
Shower, extendable handset, stern area
Sink for fresh water, 316 s.steel
Marine toilet with electric flush and holding tank
Electric windlass including main and remote console control, anchor roller, s.steel anchor and chain
Other hardware
Paddles and air pump
Tube repair kit
Owner’s manual
OPTIONAL EQUIPMENT
Equipment
Pad-Eye foldable rings and belts kit for boat lifting
GRP rollbar with navigation lights
Bimini top for GRP rollbar, 316 s.steel
316 s.steel rollbar with navigation lights
Bimini top for s.steel rollbar, 316 s.steel
Bimini top with self-supporting structure, 316 s.steel
Gas cooker, complete with system for Campingaz gas bottle
Electric drawer fridge 20lt
Electric drawer fridge 50lt
Shower, sky and handset, inside the toilet
Water Ski Pole
Console cover
Helm unit cover
Boat cover
Packages
Carbon look tubes
Synthetic teak - base pack (over-tubes gangways, engine well, bathing platforms and bow nose)
Synthetic teak - full pack (internal deck, over-tubes gangways, engine well, bathing platforms and bow nose)
EVERY STINGHER IS UNIQUE INVENT YOUR EXCLUSIVE STINGHER
Stingher Custom Design was created with the sole intention of offering our customers the latest in technology and the highest quality materials, to custom build you an individual Stingher.
We are able to offer the widest choice of colors and materials for the construction of the hull, the tubes and the upholstery of your Stingher, sport or premium helm seat, deck - locker and underwater LED lighting, excellent audio systems and a wide range of custom option for your deck hardware including special hinges, ski poles, solar panels and custom-made T-top.
All of this with the sole intention to make your Stingher exclusive.
Try now our CONFIGURATOR and create your Stingher!
Contact Us
Italboats S.r.l.
Zona Industriale, snc
73054 Presicce-Acquarica (LE) - Italy