previous arrow
next arrow
Slider

PURE GT CLASS
A GT FOR THE WHOLE FAMILY

 

The Stingher 22 GT is not to be overlooked with capabilities and features well above any other competitors model in its class.

 

Slider

 

The Stingher 22 GT was launched in 2017 and adopts the renowned 22 Diablo hull, well known to be the evolution of the winning Stingher 686XS. Also the deck comes from the 22 Diablo, but it has been redesigned bringing it up to date in styling with the rest of the Stingher GT series.
The spaces have been optimized to offer the same accessories provided with the bigger GT models, still offering freedom of movement and high comfort. The helm seat unit is very comfortable, and it is fitted with folding table, sink, cooker and fridge if required. The newly designed console gives good wind protection and has a front opening door with integral seat. On opening the front door, you step down into the console, which can be fitted with an electric flush sea toilet.
It is available in single outboard version up to a maximum of 200hp, which pushes the Rib up to 46kn in favorable sea conditions. As with all Stingher models the high performance hull is a true deep V. This provides an exceptionally dry and smooth ride, with impeccable handling, with no slamming.
The Stingher 22 GT has the distinction of all being a comfortable and sporty Rib which can be enjoyed by all the family.

 

SPECIFICATIONS

Overall length 6.80 m (22ft 4in)
Beam 2.84 m (9ft)
Draft to props
Tube ø 49÷59 cm (1ft 7in ÷ 1ft)
Air chambers 6
Weight (excl. Engines) 800 kg (1763lbs)
Max Passengers 12
Fuel tank capacity 200 lt (52 gal)
Water tank capacity 50 lt (13 gal)
Construction GRP hull and deck
Hypalon/Neoprene 1670dtex fabric tubes
CE certification category C - Coastal
Max speed range 38-46 kn
Outboard engines - suggested 1 x 150 hp
Outboard engines - max 1 x 200 hp
Fuel consumption, cruise 0,8 l / nm (1 x 200 hp @ 25 knots)
Hull type 22 degree deep V
Design Andrea Risolo
Shipyard Italboats

 

FEATURES

STEERING CONSOLE - DASHBOARD

The steering console has a wide dashboard for the installation of gauges, wide screen GPS, VHF, stereo, switches and many other controllers.

STEERING CONSOLE - SIDE VIEW

The side view of the steering console shows the modern and sophisticated design that perfectly fits functionality and offers room for for an agile passage towards the bow.

STEERING CONSOLE - FRONT VIEW

The console has a large door in the front, with built in seat, that opens up to reveal a toilet / changin room area wich can be equipped with electric flush sea toilet.

HELM SEATS

The double reclining seat allows you to drive standing or sitting, always maintaining an excellent view at sea.

HELM SEATS - DETAIL

The seats for driver and copilot are indipendent, and are designed to ensure a good lateral support while sailing in rough seas condition.

BOW SUNDECK

The bow sundeck can accomodate 2 persons and has a removable central extension to allow an easy passage towards the bow.

 

STANDARD EQUIPMENT

Hull and deck
  • Deep V hull
  • Hand layed hull, deck and GRP components
  • Antiskid diamond finishing on walkable areas
  • Hull ventilation system
  • Self-draining deck
  • Stern and bow U bolts for mooring
  • Bow nose with rope roller and cleat
  • Stern cleats, 2x
Tubes
  • CNC cutted and hand-glued hypalon / neoprene fabric tubes
  • Double rubbing strake covering the whole side of the tubes
  • Hypalon and rubber safety handles
  • Inflation valves
  • Overpressure valves (only with dark hypalon fabrics)
Steering console and helm seat
  • Steering console with overshadowed windscreen
  • Front and side 316 s.steel handrails
  • Steering wheel, 316 s.steel
  • Hydraulic steering system
  • Dashboard, carbon fibre look
  • Switch panel, Carling Switches
  • Toilet compartment / changing room, inside the console
  • 2 lateral portholes
  • Helmsman double reclining seat, for standing or sitting drive
Deck layout
  • Stern seat with removable cushion and soft back, storage locker underneath
  • Bow sundeck with removable cushions, storage locker underneath
  • External dining area
  • Plexiglass table, folding
  • Flush pull latches and gas struts on all the hatches
  • Handrail behind stern seat, 316 s. steel
  • Swim ladder, telescopic
  • Ladder side handle, s.steel
Systems and electrical
  • Automatic bilge pump, electric
  • Battery container
  • Battery isolation switch
  • 12V and USB outlet
  • Navigation lights
  • Fuel system with external deck filler cap
  • Shower, extendable handset, stern area
  • Electric windlass including main and remote console control, anchor roller, s.steel anchor and chain
Other hardware
  • Paddles and air pump
  • Tube repair kit
  • Owner’s manual

 

OPTIONAL EQUIPMENT

Equipment
  • Pad-Eye foldable rings and belts kit for boat lifting
  • Removable bow sundeck extension/s with cuscion/s
  • Removable stern sundeck extension/s with cuscion/s
  • GRP rollbar with navigation lights
  • Bimini top for GRP rollbar, 316 s.steel
  • 316 s.steel rollbar with navigation lights
  • Bimini top for s.steel rollbar, 316 s.steel
  • Bimini top with self-supporting structure, 316 s.steel
  • Bathing platform
  • Sink for fresh water, 316 s.steel
  • Gas cooker, complete with system for Campingaz gas bottle
  • Electric drawer fridge 20lt
  • Electric drawer fridge 50lt
  • Marine toilet with electric flush and holding tank
  • Water Ski Pole
  • Console cover
  • Helm unit cover
  • Boat cover
Packages
  • Carbon look tubes
  • Synthetic teak - base pack (over-tubes gangways, engine well, bathing platforms and bow nose)
  • Synthetic teak - full pack (internal deck, over-tubes gangways, engine well, bathing platforms and bow nose)
  • Synthetic teak - premium pack (internal deck, over-tubes gangways, engine well, bathing platforms and bow nose, bow and stern hatches, toilet compartment)

CUSTOM DESIGN

EVERY STINGHER IS UNIQUE
INVENT YOUR EXCLUSIVE STINGHER

Stingher Custom Design was created with the sole intention of offering our customers the latest in technology and the highest quality materials, to custom build you an individual Stingher.

We are able to offer the widest choice of colors and materials for the construction of the hull, the tubes and the upholstery of your Stingher, sport or premium helm seat, deck - locker and underwater LED lighting, excellent audio systems and a wide range of custom option for your deck hardware including special hinges, ski poles, solar panels and custom-made T-top.

All of this with the sole intention to make your Stingher exclusive.

 

A boat configurator will be available soon. Stay in the loop!

Contact Us

Office Via Podgora, 1 | 20122 Milano - Italy
Shipyard Zona Ind.le, snc | 73054 Presicce (LE) - Italy

Phone +39 0833 722 553
Whatsapp +39 329 838 9018
E-mail info@italboats.com

Follow Us

ITALBOATS S.r.l. | Iscritta al REA di Milano n.1483578 | Cap. Sociale € 15.300,00 i.v. | P.Iva/VAT IT11642820150 | Copyright © 2019

Open Menu